Titanium heat exchanger is an excellent equipment with high heat exchange efficiency, simple structure and durability, and can prevent damage to the heat exchange tube formed by the impact of fluid. Its structural performance is introduced as follows:

1. The device has a buffer plate and a diversion hole below the liquid inlet and outlet ports, which can buffer the impact of the fluid with a higher flow rate at the liquid inlet on the heat exchange tube below, and prevent the heat exchange tube from being impacted by the fluid for a long time. The pipe body is deformed, the joint is broken, and other damages.

2. Buffer plates and diversion holes can also slow down the flow rate and improve heat exchange efficiency; in addition, the heat exchange tube rack is formed by long heat exchange tubes and short heat exchange tubes, and the short heat exchange tubes form a heat exchange tube row, so that the fluid flows in When passing through the titanium heat exchanger from bottom to top or from top to bottom, while continuously performing heat exchange with the long heat exchange tube, it also needs to pass through the heat exchange tube row, which slows down the flow rate of the fluid and increases The heat exchange area, in addition, the short heat exchange tube whose cross section is oblate can further increase the heat exchange area and realize the improvement of heat exchange efficiency.

3. The angle between the heat exchange tube row and the horizontal plane is 0-45 degrees, so you can choose a suitable angle to adjust the size of the slow flow effect according to your needs. The smaller the angle, the stronger the slow flow effect, so as to adapt to liquid phases with different flow rates, or Gas phase fluid.

4. The dual-purpose port for liquid and gas inlet and the dual-purpose port for liquid and gas inlet realize the dual use of liquid and gas phase fluids. When the gas exchanges heat, the gas is fed from the dual-purpose port for liquid and gas from below. The upper liquid inlet and gas outlet are used for air outlet. When liquid heat exchange is performed, the liquid is fed in from the upper liquid inlet and gas outlet, and the liquid is discharged from the lower liquid inlet and outlet.

5.The high-efficiency and durable titanium heat exchanger has a simple structure, high heat exchange efficiency, and can prevent damage to the heat exchange tube formed by fluid impact, and is suitable for use in various heat exchange links in industry and life.

Contact us today for all your titanium heat exchanger needs.